Type: Driver
File Name:
File Size: 23.7 MB
49 (4.87)
Downloads: 34
Supported systems: Windows 2008, Windows XP, Windows Vista, Windows 7/8/10
Price: Free* (*Free Registration Required)

Download Now

Better detector sensitivity is particularly important for building applications where temperature differences are typically lower. It allows you to add sketching and graphical marks directly on the screen. The Zinnia design packs in over square inches of heat sink within a 3'-diameter luminaire. By combining different tools you can make more sophisticated analysis. Ankey Direct sales stores Store. In the image below, you can clearly see a reflection from the thermo- grapher. This is of course not a hot spot on the object. A good way to find out if what you see is a reflection or not, is for you to move.

Infracam usb at the target from a different angle and watch the hot spot.


If it infracam usb when you do, it is a reflection. Measuring temperature of mirror like details is not possible. The object in the images below has painted areas which are well suited for temperature measurement.

  • Camera - How to build a monitoring system with an infra cam? - Unix & Linux Stack Exchange
  • BUY a FLIR INFRACAM SD SD Thermal Imager TMG Test Equipment
  • BUY a FLIR INFRACAM SD SD Thermal Imager TMG Test Equipment
  • FLIR B-Series Key Performance Features
  • IRT Analyzer Tour

The material is copper, which is a infracam usb good heat conductor. This means that temperature variation over the surface is small. The image shows a circuit breaker, which has been heated by the sun.

Extech InfraCAM

Eddy currents can cause a hot spot in the current path. In cases of very high currents and close infracam usb of other metals, this has in some cases caused serious fires.

This type of heating occurs in magnetic material around the current path, such as metallic bottom plates for bushing insulators. In the image above, there are stabilizing weights, through which a high current is running. These metal weights, which are made of a slightly infracam usb material, will not conduct any current but are exposed to the alter- nating magnetic fields, which will eventually heat up the weight. This, however, need not necessarily always be the case. When looking for overheated places, it is easy to compare the three phases directly with each other, for example, cables, breakers, insulators.

FLIR B-Series Key Performance Features Θερμογραφικές κάμερες

An even load per phase should result in a uniform temperature pattern for all three phases. A fault may be suspected in cases where the temperature of one phase differs considerably from the remaining two. However, you should always make sure that infracam usb load is indeed evenly distributed. Looking at fixed ampere meters 14 or using a clip-on ampere meter up to A will tell infracam usb.


The image to the left shows three cables next to each other. They are so far infracam usb that they can be regarded as thermally insulated from each other. The one in the middle is colder than the others. Unless two phases are faulty and overheated, this is a typical example of a very unsymmetrical load. The temperature spreads evenly along the cables, which indicates a load-dependent temperature increase rather than a faulty connection. The image to the right shows two bundles with very different loads. In fact, the bundle to the right carries next to no load.

Those which carry a considerable current load, are about 5C 9F hotter than those which do not. No fault to be reported in these examples. When, infracam usb example, a number of cables are bundled together it can happen that the resulting poor cooling of the cables in the middle can lead to them reaching very high temperatures.

See the image above. In the above case, where we have a point- shaped object, which is much hotter than the surroundings, the temperature reading will be too low. Page Practical Advice For The Thermographer 13 — Introduction to thermographic inspections of electrical installations Here are ten of them to start with. Page Reflected Apparent Infracam usb 13 — Introduction to thermographic inspections of electrical installations You need to have the right value for the reflected apparent tem- perature to input into the camera and thus get the best possible correction.

Page About Infracam usb Systems 55 lb. The operator also needed a VAC generator set, and a 10 L 2. Weight: 0. In the table above, look up the temperature for which the amount of water in air is closest to Good day all. infracam usb

I have a couple of InfraCAM cameras, which are all displaying the same fault - they do not show the USB menu (where you. Infracam usb QuickReport or any other FLIR software that requires camera connection installs, it creates a directory in the following location.

Relevant Posts